4 ways of optical fiber signal input split or switch to two sets of SPDIF signal receiving device.
Audio Format supports DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD.
Used optical fiber cable whose line loss is less than 0.2Db/m, Output distance can up to 40 meter.
The Input control is switchable via IR Remote Control, directly press the button to switch.
Supports signal retiming, Supports last time working state memory when power off, No loss of signal.
LED status indication, it can tell us the working state of the device very easily.
Easy installation, Over-voltage protection design to prevent the damage caused by connecting unmatched power adapter to the machine (If the light for standby indication flash, it shows that the output voltage from the power adaptor is too high and the adaptor needs to be changed).
Need external DC5V/1A Power Supply.
-A: Power switch
-B: Standby and over-voltage indication
-C: Switch button for A channel
-D: Switch button for B channel
-E: A channel output indication
-F: A channel input indication
-G: IR Remote receiver
-H: B channel output indication
-I: A channel input indication
-A: SPDIF input port 1~4
-B: SPDIF output port A, B
-C: DC/5V Power Adaptor Interface
Support Audio Format: DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD
Peak Wavelength: 650nm
Max. Baud Rate: 16Mbps
Output Cable Distance: ≤40m (Use the optical fiber cable whose line loss is less than 0.2Db/m)
Max. Working Current: 100mA
Power Adapter Format:
-Input: AC (50HZ, 60HZ) 100V-240V
-Output: DC 5V/500mA
Operating Temperature Range: 0 ~ +40 Degree C
Operating Humidity Range: 5 ~ 90% RH (No Condensation)
Remote Control Manual:
-SPDIF output port A switch button, If the user wants to let the signal output from port A, only press the Number Keys under the Letter "A". For example, source 2 output form A port, directly press the digital key 2 under Letter "A".
-Power switch button
-SPDIF output port B switch button. If the user wants to let the signal output from B port, only press the Number keys under the Letter B. For example, source 4 output form B port, directly press digital key 4 under Letter B.
*Before using the remote of the unit, please first take out the insulation plastic film from remote-control unit tail. If the remote is under long-time rest state, please insert the insulation plastic film.
Operating and Connecting：
-To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the matrix input.
-To let the matrix output port connected to the optical fiber signal receiver (such as amplifier, home theater and so on) by using the optical cable.
-Connect 5V power supply to the matrix DC input port.
-Through the remote or button to switch the input source freely.